Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 525

show bridge groups
Copyright © 2010, Juniper Networks, Inc.
host1#show bridge westford01 all
BridgeGroup: westford01
Bridge Mode:
Aging Time:
Learning:
Max Learn:
Link Status Snmp Traps: Disabled
Subscriber Policy:
Protocol Actions:
Route IP
Route PPPoE
Port Count:
Interface Count:
Address Table:
Address
-------------- ----------
1011.22b2.333c forward
1234.abcd.5678 discard
Interfaces:
ATM3/3.1
Port Number: 1
Operational Status: LowerLayerDown
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Subscriber
Statistics:
In Octets:
In Frames:
In Discards:
In Errors:
Out Octets:
Out Frames:
Out Discards: 0
Out Errors:
queue 0: traffic class best-effort, bound to bridge
Queue length 0 Bytes
Forwarded packets 0, Bytes 0
Dropped committed packets 0, Bytes 0
Dropped conformed packets 0, Bytes 0
Dropped exceeded packets 0, Bytes 0
See show bridge.
Use to display configuration information for all bridge groups currently configured on
your router.
To display the configuration settings for all bridge groups on your router, use the details
keyword.
Field descriptions
BridgeGroup—Name assigned to the bridge group
Bridge Mode—Bridging capability currently enabled, either concurrent routing and
bridging (CRB) or default bridging
Chapter 15: Configuring Transparent Bridging
CRB
300 secs
Enabled
Unlimited
default Subscriber
1
1
Action Interface
-------------------
ATM3/3.1
---
0
0
0
0
0
0
0
Age
-----
---
---
ATM3/3.1
493