Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 196

JunosE 11.2.x Link Layer Configuration Guide
164
Policed Statistics—Number of packets that exceeded the number allowed and were
policed (or dropped)
ARP Statistics—Analysis of ARP traffic on this interface; In fields are for traffic received
on the interface and Out fields are for traffic sent on the interface
ARP requests—Number of ARP requests
ARP responses—Number of ARP responses
Errors—Total number of errors in all ARP packets
Discards—Total number of discarded ARP packets
Administrative qos-shaping-mode—QoS shaping mode:
disabled—Shaping mode is configured but not operational
frame—Statistics are reported about bytes in frames, such as transmitted bytes
and dropped bytes.
cell—Shaping mode for shaping and policing rates is cell-based; resulting traffic
stream conforms exactly to the policing rates configured in downstream devices.
Reports statistics in bytes in cells and accounts for cell encapsulation and padding
overhead.
none—Shaping mode is not configured
Operational qos-shaping-mode—Actual shaping mode for the interface:
disabled
frame
cell
none
queue—Hardware packet queue associated with the specified traffic class and
interface
traffic class—Name of traffic class
bound to—Interface to which queue is bound
Queue length—Length of the queue, in bytes
Forwarded packets, bytes—Number of packets and bytes that were forwarded on
this queue
Dropped committed packets, bytes—Number of committed packets and bytes
that were dropped
Copyright © 2010, Juniper Networks, Inc.