Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 128

JunosE 11.2.x Link Layer Configuration Guide
show atm vc-class
96
InF5EndLoopCommands:
InF5EndLoopResponses:
InF5SegLoopCells:
InF5SegLoopCommands:
InF5SegLoopResponses:
InF5EndAisCells:
InF5SegAisCells:
InF5EndRdiCells:
InF5SegRdiCells:
InF5EndCCActDeActCells:
InF5SegCCActDeActCells:
InF5EndCCCells:
InF5SegCCCells:
OutOamF5Cells:
OutF5EndLoopCells:
OutF5EndLoopCommands:
OutFEndLoopResponses:
OutF5SegLoopCells:
OutF5SegLoopCommands:
OutF5SegLoopResponses:
OutF5EndRdiCells:
OutF5SegRdiCells:
OutF5EndCCActDeActCells:
OutF5SegCCActDeActCells:
OutF5EndCCCells:
OutF5SegCCCells:
Circuit is DOWN, time since last change: 02:25:52
See show atm vc atm.
Use to display information about the VC classes configured on the router.
To display only the names of all VC classes configured on the router, use the command
with no keywords.
To display detailed configuration information about a particular VC class, specify the
name of the VC class.
To display the settings for parameters in the VC class that are configured with default
values, use the include-defaults keyword.
Field descriptions
Encapsulation Type—Encapsulation method configured in the VC class: AUTO, AAL5,
AAL0, MUX, SNAP
Service Category—Service category configured in the VC class: UBR, UBR-PCR,
NRT-VBR, RT-VBR, CBR
Peak Cell Rate—Peak cell rate (PCR), in Kbps, configured for the service category
OAM VC Integrity—Status of F5 OAM VC integrity features on the PVC: enabled or
disabled
OAM VC Integrity loop-back timer—Number of seconds the router waits between
the transmission of loopback cells during normal operation
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Copyright © 2010, Juniper Networks, Inc.