Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 733

show vlan bulk-config
Copyright © 2010, Juniper Networks, Inc.
ATM1483 Bridged Ethernet Profile : none assigned
ATM1483 PPP Profile
ATM1483 PPPoE Profile
ATM Virtual Circuit Class
Example 3—Displays configuration information for a base profile assigned to a dynamic
VLAN subinterface
host1#show profile name vlanProfile
VLAN Auto-configure ip
VLAN Auto-configure pppoe
VLAN Svlan Ethertype
VLAN Agent Circuit Identifier
VLAN Advisory Rx Speed
VLAN Advisory Tx Speed
VLAN Description
VLAN IP Profile
VLAN PPPoE Profile
VLAN Service Profile
Bridged Ethernet Mtu
Bridged Ethernet Service Profile
See show profile.
Use to display information, including base profile assignments and overriding profile
assignments, for the bulk-configured VLAN ranges on a VLAN major interface.
To display information for all VLAN ranges on the router, use the command with no
keywords.
To display information for the VLAN range associated with a particular bulk
configuration name, use the command with the name keyword.
To display information for a particular VLAN range on a specified VLAN interface, use
the command with the interface specifier and the name keyword.
Field descriptions
Interface—Identifier of the physical interface on which the bulk-configured VLAN
range resides. For more information about specifying the VLAN subinterface, see
Interface Types and Specifiers in JunosE Command Reference Guide.
Bulk Config Name—Name of the bulk-configured VLAN range on this interface
Start Svlan Id—Starting S-VLAN ID (inclusive) of the S-VLAN group in the subrange
End Svlan Id—Ending S-VLAN ID (inclusive) of the S-VLAN group in the subrange
Start Vlan Id—Starting VLAN ID (inclusive) of the VLAN group in the subrange
End Vlan Id—Ending VLAN ID (inclusive) of the VLAN group in the subrange
Assigned Profile—Base profile name for the dynamic VLAN subinterface assigned
to this VLAN subrange with "profile vlan bulk-config" on page 667 . When no profile
is assigned to the VLAN subrange, the field displays none assigned.
Admin State—Administrative state of the VLAN subrange: up or down
Chapter 18: Configuring Dynamic Interfaces Using Bulk Configuration
: none assigned
: pppoeProfile
: premium-subscriber-class
: enabled
: enabled
: auto-configure
: disabled
: 100 Kbps
: 2500 Kbps
: testing
: ipProfile
: pppoeProfile
: none assigned
: 1971
: eastServiceProfile
701