Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 133

show atm vp-description
Copyright © 2010, Juniper Networks, Inc.
InOamF4EndAisCells
InOamF4EndRdiCells
InOamF4EndCCActDeActCells
InOamF4EndCCCells
OutOamF4EndCells
OutOamF4EndLoopbackCells
OutOamF4EndLoopbackCommands
OutOamF4EndLoopbackResponses
OutOamF4EndRdiCells
OutOamF4EndCCActDeActCells
OutOamF4EndCCCells
Time since last status change
Segment OAM CC verification Disabled
VP State
VP Oam State
InOamF4SegmentCells
InOamF4SegmentCellsDropped
InOamF4SegmentLoopbackCells
InOamF4SegmentLoopbackCommands
InOamF4SegmentLoopbackResponses
InOamF4SegCCActDeActCells
InOamF4SegCCCells
OutOamF4SegmentCells
OutOamF4SegmentLoopbackCells
OutOamF4SegmentLoopbackCommands
OutOamF4SegmentLoopbackResponses :0
OutOamF4SegRdiCells
OutOamF4SegCCActDeActCells
OutOamF4SegCCCells
Time since last status change
VP Description: ATM-12/0-VPI-1
See show atm vp.
Use to display VP descriptions configured using the atm vp-description command.
To display all VP descriptions configured on the router, issue the command without
an ATM identifier or VPI number (Example 1).
To display all VP descriptions for a particular ATM interface, specify the ATM interface
identifier without the VPI number (Example 2).
To display the VP description for a particular VPI, specify both the ATM interface
identifier and the VPI number (Example 3).
Field descriptions
Interface—ATM interface identifier
VPI—Virtual path identifier
Description—Text description configured for the VP
Example 1—Displays all VP descriptions configured on the router
host1#show atm vp-description
Interface VPI
ATM 2/0 0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:08:48:43
:up
:not managed
:0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:08:48:44
Description
atm20Vpi0Subscribers
Chapter 1: Configuring ATM
101