Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 527

show bridge port
Copyright © 2010, Juniper Networks, Inc.
Use to display configuration, statistics, and status information for all ports (interfaces)
or for a specified port associated with a bridge group.
To display only the port number, interface identifier, and status for each port, use the
brief keyword.
Field descriptions
Port Number—Bridge group port number on which this interface resides
Operational Status—Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
Admin Status—State of the physical interface: Up, Down
Snmp Link Status Trap—Whether SNMP link status processing is enabled or disabled
for the specified bridge interface
Max Learn—Maximum number of dynamic MAC addresses that the bridge group
interface can learn
Subscriber Policy—Name of the subscriber policy currently in effect for the bridge
group interface
Statistics—Displays statistics information for the specified port
In Octets—Number of octets received on this interface
In Frames—Number of frames received on this interface
In Discards—Number of incoming packets discarded on this interface
In Errors—Number of incoming errors received on this interface
Out Octets—Number of octets transmitted on this interface
Out Frames—Number of frames transmitted on this interface
Out Discards—Number of outgoing packets discarded on this interface
Out Errors—Number of outgoing errors on this interface
queue—Hardware packet queue associated with the specified traffic class and
interface
Queue length—Length of the queue, in bytes
Forwarded packets, Bytes—Number of packets and bytes forwarded on this queue
Dropped committed packets, Bytes—Number of committed packets and bytes
that were dropped
Chapter 15: Configuring Transparent Bridging
495