Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 225

Copyright © 2010, Juniper Networks, Inc.
Svlan Id—S-VLAN ID value, if configured
Vlan Id—VLAN ID value for the VLAN subinterface
Ethertype—S-VLAN Ethertype value, if configured
Type—Type of VLAN subinterface
Static—VLAN or S-VLAN subinterface was configured statically
Dynamic—VLAN or S-VLAN subinterface was configured dynamically
In—Analysis of inbound traffic on this interface
Bytes—Number of bytes received on the VLAN or S-VLAN subinterface
Packets—Sum of all unicast, broadcast, and multicast packets received on the
VLAN or S-VLAN subinterface
Multicast—Number of multicast packets received on the VLAN or S-VLAN
subinterface
Broadcast—Number of broadcast packets received on the VLAN or S-VLAN
subinterface
Errors—Total number of errors in all received packets; some packets might contain
more than one error
Discards—Total number of discarded incoming packets
Out—Analysis of outbound traffic on this interface
Bytes—Number of bytes sent on the VLAN or S-VLAN subinterface
Packets—Number of packets sent on the VLAN or S-VLAN subinterface
Multicast—Number of multicast packets received on the VLAN or S-VLAN
subinterface
Broadcast—Number of broadcast packets received on the VLAN or S-VLAN
subinterface
Errors—Total number of errors in all transmitted packets; some packets might
contain more than one error
Discards—Total number of discarded outgoing packets
ARP Statistics—Analysis of ARP traffic on this interface; In fields are for traffic received
on the interface and Out fields are for traffic sent on the interface
ARP requests—Number of ARP requests
ARP responses—Number of ARP responses
Chapter 5: Configuring VLAN and S-VLAN Subinterfaces
193