Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 220

Software for e series broadband services routers link layer configuration guide
Table of Contents

Advertisement

JunosE 11.2.x Link Layer Configuration Guide
188
To specify a nondefault time interval in the range 5–30 seconds at which the router
calculates bit rate and packet rate statistics, use the optional load-interval keyword.
The default time interval is 5 seconds.
To display the time at which the router calculates bit rate and packet rate statistics
for the current interval, use the optional display-time-of-day keyword.
To stop the monitor vlan interface command, press Ctrl+c.
Field descriptions
Interface—Interface identifier for the Ethernet or LAG interface on which the VLAN
subinterface resides
Seconds between polls—Number of seconds at which the router calculates bit rate
and packet rate statistics
Input bps/pps—Number of bits per second (bps) and packets per second (pps)
received on this interface during the specified load interval
Output bps/pps—Number of bits per second (bps) and packets per second (pps)
transmitted on this interface during the specified load interval
Time—Time of day, in hh:mm:ss format, at which the router calculates the bit rate
and packet rate statistics for the current interval
Example 1—Displays bit rate and packet rate statistics over the default (5-second)
load interval for a single VLAN subinterface
host1#monitor vlan interface fastEthernet 0/0.1
Interface
----------------------- -------- --------------- ---------------
FastEthernet 0/0.1
FastEthernet 0/0.1
FastEthernet 0/0.1
FastEthernet 0/0.1
FastEthernet 0/0.1
FastEthernet 0/0.1
host1#^C
Example 2—Displays bit rate and packet rate statistics over a 10-second load interval
for two VLAN subinterfaces, with the time of day that the statistics were calculated
host1#monitor vlan interface fastEthernet 0/0.1 fastEthernet 4/0.1
load-interval 10 display-time-of-day
Interface
----------------------- -------- --------------- --------------- --------
FastEthernet 0/0.1
FastEthernet 4/0.1
FastEthernet 0/0.1
FastEthernet 4/0.1
FastEthernet 0/0.1
FastEthernet 4/0.1
host1#^C
Seconds
between
polls
Input bps/pps
0
--/--
5
120240/100
5
120000/100
5
92400/77
5
88800/74
5
120000/100
Seconds
between
polls
Input bps/pps
0
--/--
0
--/--
10
120120/100
10
120000/100
10
120000/100
10
120000/100
Copyright © 2010, Juniper Networks, Inc.
Output bps/pps
--/--
120240/100
120000/100
92400/77
88800/74
120000/100
Time
Output bps/pps
(UTC)
--/-- 10:50:33
--/-- 10:50:33
120120/100 10:50:43
120000/100 10:50:43
120000/100 10:50:53
120000/100 10:50:53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2

Table of Contents