Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 388

JunosE 11.2.x Link Layer Configuration Guide
356
Table 17: show ppp interface mlppp Output Fields (continued)
Field Name
Receive Class number
fragments in reassembly list
reordered
discarded fragments/bytes
last received sequence number
Transmit Class number
fragments
last sent sequence number
Bundle name
MLPPP interface interfaceName
LCP negotiated options
Field Description
Information about the packets of the specified
multilink class received by the router
Number of buffered fragments reassembled
Number of fragments reordered
Number of fragments and bytes that have been
discarded.
Sequence number of the last multiclass MLPPP
packet received
Information about the packets of the specified
multilink class transmitted by the router
Number of fragments that are sent by the router
Sequence number of the last multiclass MLPPP
packet sent
Name of the MLPPP bundle
Name and state (up or down) of the configured
MLPPP interface
Negotiated LCP options for the local and peer
systems:
max-receive-unit—Negotiated maximum receive
unit, in octets, for the local and remote (peer) side
of the link
max-receive-reconstructed-unit—Negotiated
maximum receive reconstructed unit, in octets, for
the local and remote (peer) side of the link
authentication—Negotiated authentication method
(none, pap, or chap) for the local and remote (peer)
side of the link
magic-number—Negotiated magic number for the
local and remote (peer) side of the link
pfc—Negotiated protocol field compression (none
or enabled) for the local and remote (peer) side of
the link
acfc—Negotiated address and control field
compression (none or enabled) for the local and
remote (peer) side of the link
multiclass-classes—Number of multilink classes
negotiated
multiclass-sequence-format—Format of the
negotiated sequence number: long or short
Copyright © 2010, Juniper Networks, Inc.