Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 222

JunosE 11.2.x Link Layer Configuration Guide
show interfaces gigabitEthernet
show interfaces tenGigabitEthernet
190
Bytes—Number of bytes sent on the VLAN or S-VLAN subinterface
Packets—Number of packets sent on the VLAN or S-VLAN subinterface
Multicast—Number of multicast packets sent on the VLAN or S-VLAN subinterface
Broadcast—Number of broadcast packets sent on the VLAN or S-VLAN
subinterface
Errors—Total number of errors in all transmitted packets; note that some packets
might contain more than one error
Discards—Total number of discarded outgoing packets
Example 1—Displays the status of a Fast Ethernet VLAN subinterface
host1:vr2#show interfaces fastEthernet 8/3.1
FastEthernet8/3.1 is Up, Administrative status is Up
VLAN ID: 10, address 0090.5e00.0001
In: Bytes 39256, Packets 612
Multicast 0, Broadcast 0
Errors 0, Discards 0
Out: Bytes 4536220, Packets 70873
Multicast 0, Broadcast 70258
Errors 0, Discards 0
ARP Statistics:
In: ARP requests 1, ARP responses 0
Errors 0, Discards 0
Out: ARP requests 1, ARP responses 0
Errors 0, Discards 0
Example 2—Displays the status of a Fast Ethernet S-VLAN subinterface
host1:vr2#show interfaces fastEthernet 0/0.1
FastEthernet0/0.1 is Up, Administrative status is Up
SVLAN ID: 1, VLAN ID: 0, Ethertype 0x9100
In: Bytes 39256, Packets 612
Multicast 0, Broadcast 0
Errors 0, Discards 0
Out: Bytes 4536220, Packets 70873
Multicast 0, Broadcast 70258
Errors 0, Discards 0
ARP Statistics:
In: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Out: ARP requests 0, ARP responses 0
Errors 0, Discards 0
See show interfaces.
Use to display the status of Gigabit Ethernet interfaces, 10-Gigabit Ethernet interfaces,
VLAN subinterfaces, or S-VLAN subinterfaces.
You can specify the following keywords:
Copyright © 2010, Juniper Networks, Inc.