Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual page 448

JunosE 11.2.x Link Layer Configuration Guide
aaa tunnel calling-number-format
aaa tunnel calling-number-format-fallback
416
host1(config)#aaa tunnel calling-number-format fallback descriptive
d. (Optional) Use the show radius override command to verify the override settings
configured for RADIUS, and the show aaa tunnel-parameters command to
verify the parameters configured for L2TP tunnel definitions.
host1#show radius override
host1#show aaa tunnel-parameters
For information about how to use these commands, see "show radius override"
on page 433 and "show aaa tunnel-parameters" on page 420.
Use to configure the format used by the E Series LAC to generate the L2TP Calling
Number AVP 22.
The fixed format is similar to the fixed format of RADIUS attribute 31
(Calling-Station-Id). The LAC uses this format in ICRQ packets that it sends to the
LNS.
Several different descriptive formats include information about the interface and either
or both of the suboptions supplied by the PPPoE intermediate agent, agent-circuit-id
and agent-remote-id.
Several simpler formats include only either or both of the PPPoE suboptions,
agent-circuit-id and agent-remote-id.
Example 1
host1(config)#aaa tunnel calling-number-format descriptive include-agent-circuit-id
Example 2
host1(config)#aaa tunnel calling-number-format descriptive include-agent-circuit-id
include-agent-remote-id
Example 3
host1(config)#aaa tunnel calling-number-format include-agent-circuit-id
Use the no version to restore the default calling number format, descriptive.
See aaa tunnel calling-number-format.
Use to configure the fallback format that the E Series LAC uses to generate the L2TP
Calling Number AVP 22 in the event that the PPPoE agent ID is null or unavailable.
The fallback format is used only when the configured calling number format includes
either or both of the agent-circuit-id and agent-remote-id.
The calling number format determines what element triggers use of the fallback format:
Calling Number Format
agent-circuit-id
Fallback Trigger
agent-circuit-id is empty
Copyright © 2010, Juniper Networks, Inc.