JunosE 11.2.x Link Layer Configuration Guide
86
Lockout state (seconds)—Settings of encapsulation type lockout for the upper-layer
encapsulation type indicated
Min—Minimum lockout time, in seconds
Max—Maximum lockout time, in seconds
Current—Current lockout time, in seconds; displays 0 (zero) if lockout is not
occurring
Elapsed—Time elapsed into the lockout time, in seconds; displays 0 (zero) if
lockout is not occurring
Next—Lockout time for the router to use for the next lockout event, in seconds
Assigned profile—For each dynamic interface type, indicates whether or not a profile
is assigned and, if assigned, displays the profile name
Interface Alias—Text description or alias if configured for the subinterface
Subscriber info—Subscriber login information for the specified dynamic interface
type (bridged Ethernet or IP)
Assigned VC Class—Name of the VC class assigned to this subinterface, if configure
SNMP trap link-status—Trap link status: enabled or disabled
Advisory receive speed—Configured receive speed, in Kbps, for the dynamic ATM 1483
subinterface. The E Series LAC sends this value to the LNS in the RX Connect-Speed
AVP [38].
InPackets—Number of packets received on this interface
InBytes—Number of bytes received on this interface
OutPackets—Number of packets transmitted on this interface
OutBytes—Number of bytes transmitted on this interface
InErrors—Number of errors received on this interface
OutErrors—Number of outgoing errors on this interface
InPacketDiscards—Number of incoming packets discarded on this interface
InPacketsUnknownProtocol—Number of incoming packets with an unknown protocol
type
OutDiscards—Number of outgoing packets discarded on this interface
Example 1—Displays the current state of all ATM subinterfaces
host1#show atm subinterface
Interface
ATM-Prot VCD VPI VCI Type
----------- -------- --- --- --- ----- ----- ---- -------------- ---------
ATM 2/0.101 RFC-1483 101
Circuit
Encap MTU
0 101 PVC
AUTO
9180 dormantLockout Static
Copyright © 2010, Juniper Networks, Inc.
Interface
Status
Type
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 and is the answer not in the manual?
Questions and answers