Configuring e-mail settings and routing
6
To close the contact when a match to the rule is found, select the This Rule
will close the Contact check box.
Adding an auto-response to the rule
Auto-responses are used to send messages to a sender. You can use an auto-
response to send information to a sender or as an acknowledgement of receipt of
an e-mail contact. An auto-response is optional.
To select an auto-response for the rule
1
On the Rule Configuration Wizard - Output Criteria window, under Auto-
responses, select a response you want to use for this rule.
To create a new auto-response, perform the following steps:
a. On the Rule Configuration Wizard - Output Criteria window, under
b. Click New.
1134
Auto-Responses, click More.
Result: The Auto-Responses window appears:
Result: The New Auto-Response window appears.
Contact Center Multimedia/Outbound
Standard 7.16