Nortel Contact Center Multimedia Installation And Maintenance Manual page 1561

October 2007
Call Request Queue Size
Sets the maximum queue size for network skillsets. When the set maximum is
reached, the queue rejects calls. For Network Skill-Based Routing, Call Request
Queue Size (CRQS) is configured in Contact Center Manager Administration. If
the NACD fallback or the Queue_to_NACD script command is used, CRQS
must be configured in LD23 on the switch. See also Flow Control Threshold.
call source
The site from which an incoming network call originates. See also call
destination.
call treatment
A script element that enables you to provide handling to a call while it is waiting
to be answered by a contact center agent. For example, a caller can hear a
recorded announcement or music while waiting for an agent.
call variable
A script variable that applies to a specific call. A call variable follows the call
through the system and is passed from one script to another with the call. See
also global variable, script variable.
CallPilot
A multimedia messaging system you can use to manage many types of
information, including voice messages, fax messages, e-mail messages,
telephone calls (including conferencing), calendars, and directories.
campaign
See outbound campaign.
CAT
Channel Allocation Table
CCR
customer controlled routing
CDN
See controlled directory number.
Installation and Maintenance Guide 1561