Step 20. Select The Journal File - Nortel Contact Center Multimedia Installation And Maintenance Manual

Installing the Standby server

Step 20. Select the Journal file

The Multimedia server uses journal files to apply the same updates to the
Standby server that are on the active Multimedia server. After you select the
correct journal file, you ensure the Standby server reads the correct journal file
on the active Multimedia server and makes all changes made on the active
Multimedia server since the last backup. You must use the journal file you
recorded in "Recording the journal file path" on page 888. After the journal file
is configured, the Standby server reads all subsequent journal files from the
Active server and the servers are synchronized.
ATTENTION
Journal files are updated when the following events occur:
the Caché Controller service is started
a specific time of day
the maximum file size is reached
a backup or restore is completed
a user directs the new journal file to start (Caché Control Panel >
Journaling)
Selecting the correct journal file
1 On the Standby server, click Start > All Programs > Nortel Contact
Center > Multimedia Server > Caché Control Panel.
Result: The Username/Password window appears.
964
If you select the wrong journal file, you can lose data.
Contact Center Multimedia/Outbound
Standard 7.16