Nortel Contact Center Multimedia Installation And Maintenance Manual page 1548

Change the names or IP addresses of servers
6 Click Yes.
Result: The server restarts.
Updating the Domain Name Service server
If you configure a Domain Name Service (DNS) server for name resolution in
your network, you must contact your local network prime to update the DNS
with the new computer name.
To verify that the new IP address is up to date on the DNS, use the ping <server
name> DOS command with the new server name to confirm that the system
responds with the corresponding IP address.
Changing the Contact Center Multimedia Standby server name
Perform the following steps on the Contact Center Multimedia Standby server.
1 In the Contact Center Multimedia Administrator window, expand Contact
Center Multimedia.
2 Expand General Administration.
3 Double-click Server Settings.
Result: The Server Settings dialog box appears.
4 Click Contact Center Multimedia Standby Server to select it.
5 Click Edit.
Result: The Server Properties dialog box appears.
6 In the Server Name box, type the new name of the Contact Center
Multimedia Standby server.
1548 Contact Center Multimedia/Outbound
Standard 7.16