Nortel Contact Center Multimedia Installation And Maintenance Manual page 1272

Managing security
Applying a security policy to the Contact Center Multimedia server
using the Security Configuration Wizard
You can select minimum options when running the Security Configuration
Wizard on your Contact Center Multimedia server. You can create a less
restrictive policy by enabling other services and server roles depending on your
requirements.
Note: Contact Center Multimedia 6.0 must be installed and all Contact Center
Multimedia services must be started on your server before running the Security
Configuration Wizard as the wizard detects what inbound ports the server is
listening on.
To run the Security Configuration Wizard
1 Click Start > Run.
2 Type SCW, and then click OK.
3 On the Welcome window, click Next.
4 On the Configuration window, select Create a New Security Policy and
click Next.
Result: The host name of the local server appears on the Select Server
window.
5 Ensure the host name of the local server is correct, and then click Next.
6 After the processing of the security configuration database is finished, click
Next.
7 Beside Select Server Roles, click Next.
8 Select the Web Server check box, and then click Next.
Note: Only the Web server role is required by the Contact Center
Multimedia server.
9 In the Select Client Features window, select the client features you want to
enable.
As a minimum, Nortel recommends that you select the following features:
Automatic update client
DNS Client
DNS registration client
1272 Contact Center Multimedia/Outbound
Standard 7.16