Nortel Contact Center Multimedia Installation And Maintenance Manual page 663

October 2007
6 Click Backup.
Result: The Backup CCMM Database window appears.
7 Beside Backup to, select your backup location, Network or Tape.
8 In the Database box, review the file name for your backup file. To change
the file name, click Browse, and then select the file name.
IF
you are
backing up to a
network
location
you are
backing up to a
tape drive
Installation and Maintenance Guide
Migrating Contact Center 6.0 to a new server
THEN
in the Database box, browse to X:\folder name on the
network share\. For example, if the network drive is X,
and the mapped folder is backup, and a subfolder is
CCMM_backup, then you browse to X:\CCMM_backup\.
You must map the back up folder. See "Creating the
backup destination" on page 1208.
In the Database box, select the path to the tape drive. A
valid path to the tape drive is \\.\tapen, where n is the
number of the tape drive. (The first tape installed on a
system is, by default, tape0.)
663