Nortel Contact Center Multimedia Installation And Maintenance Manual page 1420

Change the names or IP addresses of servers
Updating the Domain Name Service server
If you configure a Domain Name Service (DNS) server for name resolution in
your network, you must contact your local network prime to update the DNS
with the new computer name.
To verify that the new IP address is up to date on the DNS, use the ping <server
name> DOS command with the new server name to confirm that the system
responds with the corresponding IP address.
Synchronizing the operating system name with the Contact Center
Manager Server name
On the Replication Server, the Active Server, and the Standby Server, depending
on which server name you changed, perform the following steps:
1 Log on to the Contact Center Manager Server as Administrator.
2 From the Start menu, choose All Programs > Nortel Contact Center >
Manager Server > Computer Name Sync
Result: The Contact Center Manager Server Computer Name
Synchronization Utility dialog box appears.
1420
.
Contact Center Multimedia/Outbound
Standard 7.16