REP 1.1 Left and Right Side Covers
Parts List on PL 1.1 and PL 1.2
Removal
1.
Switch Off the Printer and disconnect the Power Cord.
2.
Remove the Front Cover (REP 1.2).
3.
Remove the screw (1) for the Left or Right Side Cover at the rear of the printer
Right Cover Screw
Figure 1 Left and Right Cover Screws (Rear View)
4.
Remove the Side Covers being careful not to damage the Fastening Hooks
a.
Pull the bottom of the cover away from the printer to remove it.
Figure 2 Fastening Hooks
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
Replacement
Install the components in the reverse of removal.
(Figure
1).
Left Cover Screw
(Figure
2):
June 2014
4-3
Repairs
REP 1.1