Siemens SINAMICS DCM Manual page 90

Mount the CUD and push it into the connectors for the left-hand CUD.
•
Secure the CUD using four screws (screw and washer assembly, M3×6), tightening torque 1 Nm
•
Figure 5-13
Lock the BOP support again.
•
CAUTION: Do not clamp the BOP cable
Figure 5-14
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Installing a second CUD (2)
Installing a second CUD (3)
ac.maher.co.ir
Transportation, unpacking, installation
5.2 Installation
91