Siemens SINAMICS DCM Manual page 578

10.27.5 12-pulse series connection
Note
12-pulse applications
The circuit diagrams in this chapter are block diagrams.
You can find detailed information on interconnecting, dimensioning and parameterizing in the
application document "12-pulse applications".
Support is also available through our Technical Support organization (for contact address,
see the Preface).
Topology
The following diagram shows the topology of a 12-pulse series connection of two SINAMICS
DCM.
Figure 10-85 12-pulse series connection (1), block diagram
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
10.27 Connecting units in parallel and in series
ac.maher.co.ir
Descriptions of functions
579