Siemens SINAMICS DCM Manual page 364

The possible number of characters in a DC name display is limited by the screen in question:
1. DO name in screens displaying the current DO
Examples of screens in this category are operation screens, parameter lists, quick
commissioning wizard screens, etc.
The maximum text length is 7 characters. Example {2:DC_CTRL}
Texts of up to 7 characters in length are displayed in full. The first 6 characters of texts
that are 8 to 25 characters in length are displayed with "..." as the 7th character.
2. DO names in the overview of faults and alarms (alarm overview)
The maximum text length is 12 characters. Example 2: HOIST 1234
Texts of up to 12 characters in length are displayed in full.
The first 11 characters of texts that are 13 to 25 characters in length are displayed with
"..." as the 12th character.
Texts that have been shortened can be displayed in full for around 3 seconds by pressing
the "+/-" button, provided that the "User-definable DO name" function is activated.
Reset AOP settings
Selecting this menu command resets the AOP factory settings for the following:
● Language
● Display (brightness, contrast)
● Operation screen
● Control settings
Note
When you reset parameters, all settings that are different from the factory settings are
immediately reset on the operator panel. This may cause the unit to switch to an
unwanted operating state. For this reason, you should always take great care when
resetting parameters.
9.3.5.5 AOP30 diagnostics
Software/database version
This menu command shows the versions of the software and database.
The database version must be compatible with the drive software version (refer to parameter
r0018).
Database contents
Shows detailed information on the drive objects (DOs) present in the system
Battery status
This menu displays the battery voltage (in volts and as a bar chart). The battery ensures that
the data in the database and the current time are retained.
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
9.3 Controlling via the AOP30 operator panel
ac.maher.co.ir
Operation
365