Siemens SINAMICS DCM Manual page 376

Descriptions of functions
10.1 Inputs/Outputs
10.1.1 Overview of inputs/outputs
Table 10- 1 Overview of inputs and outputs
Component Digital
CUD
4 inputs
•
(2 inputs freely available, 2 inputs with
ON/OFF1 and controller enable pre-
assigned)
4 bidirectional inputs/outputs
•
4 outputs
•
1 incremental encoder input
•
Power unit
1 relay output
•
TM15
24 bidirectional inputs/outputs
•
TM31
8 inputs
•
4 bidirectional inputs/outputs
•
2 relay outputs
•
TM150 -
Technical data for inputs and outputs:
For the CUD and power unit, see Chapter Connecting (Page 93)
•
For the TM15, TM31 and TM150, see Chapter Additional system components (Page 189)
•
10.1.2 Digital inputs/outputs
Function diagrams in the SINAMICS DCM List Manual
2050
2055
2060
2065
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Digital inputs DI 0 ... DI 3
Digital outputs DO 0 ... DO 3
Digital inputs/outputs, bi-directional DI/DO 4 and DI/DO 5
Digital inputs/outputs, bi-directional DI/DO 6 and DI/DO 7
ac.maher.co.ir
Analog
7 inputs
•
2 outputs
•
1 temperature sensor input
•
1 input for analog tachometer
•
-
2 inputs
•
2 outputs
•
1 temperature sensor input
•
12 inputs for max. 12 temperature sensors
•
(PT100, PT1000, KTY84, PTC, bimetal con-
tact)
Number depending on connection type
10
377