Siemens SINAMICS DCM Manual page 307

Commissioning
8.6 Commissioning optional additional modules
8.6.2 Encoder evaluation (SMC30)
With an optional SMC30 encoder evaluation, a second incremental encoder can be
evaluated. Subsequently adding or deleting an SMC30 to/from an existing project is only
possible with the STARTER commissioning tool.
8.6.2.1 Add/commissioning (with STARTER)
Note: STARTER must be offline.
● Start the drive wizard via Configuration – DDS configuration
Figure 8-40
EDS and DDS can be set and DDS copied in the lower part of the window.
308
Configuring DDS (1)
ac.maher.co.ir
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001