Siemens SINAMICS DCM Manual page 361

Operation
9.3 Controlling via the AOP30 operator panel
The figure below shows how the entries are assigned to the screen positions:
Figure 9-21
9.3.5.4 Lists of signals for the operation screen
The following tables list some of the main signals for the operation screen along with their
associated reference variables and default settings for quick commissioning.
DC_CTRL object
Table 9- 9 List of signals for the operation screen - DC_CTRL object
Signal
Factory setting (entry no.)
N setpoint following limitations
Status display
Actual EMF value
Field current actual value
Speed actual value
Actual armature current value
Armature firing angle
Field firing angle
Motor temperature rise
362
Layout of the entries on the operation screen
Parameter
(1) r50029
(2) r50000
(3) r52287
(4) r52265
(5) r00021
(6) r00027
(7) r50018
(8) r50034
(9) r50014.0
ac.maher.co.ir
Short name Unit
NSET rpm
STAT -
EMF %
I_F %
N_ACT rpm
I_ACT A
ALF_A °
ALF_F °
TEMP %
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Scaling (100%=...) see
table below
p2000
-
-
-
p2000
p2002
-
-
-
SINAMICS DCM DC Converter