Siemens SINAMICS DCM Manual page 167

Connecting
6.9 Assignment of terminals and connectors
6.9 Assignment of terminals and connectors
WARNING
Connecting the device incorrectly can lead to damage or destruction.
Power cables and busbars must be mechanically fastened in place outside of the device.
NOTICE
The information regarding the connection capability of the terminals in the tables below is
based on values from the terminal data sheets. The connecting cables must be
dimensioned for the currents that will flow.
Overview
Table 6- 21 Terminals and connectors overview
1U1, 1V1, 1W1, 1C1, 1D1
3U1, 3W1, 3C, 3D
4U1, 4V1, 4W1, 4N1
5U1, 5W1, 5N1
XP24V
X100, X101
X126
X165, X166
X177
for option G63:
X177_1, X177_2, X177_5
X178, X179
XR1
XS1
XT1
168
Power unit
Exciter circuit
Fan
Devices with "Power interface with AC electronic power supply"
Devices with "Power interface with DC electronic power supply"
DRIVE-CLiQ
PROFIBUS
Parallel interface
Analog inputs, digital inputs, digital outputs, setpoints, reference voltage (P10/N10), serial
interface (peer-to-peer), incremental encoder, analog outputs, temperature sensor
Interface to AOP30, USS interface
Relay output for line contactor (up to 240 V)
Safety shutdown E-STOP
Analog tachometer
ac.maher.co.ir
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001