Siemens SINAMICS DCM Manual page 202

7.2.3.5 X524 electronic power supply
Table 7- 10 X524 terminal strip
Terminal
+
+
M
M
Terminal type: Spring-loaded terminal
Connectable conductor cross-section: Flexible, 0.08 mm
Stripped length: 8 to 9 mm
Tool: 0.4 × 2.0 mm screwdriver
Note
The two "+" or "M" terminals are jumpered in the connector. This ensures that the supply
voltage is looped through.
7.2.4 Connection examples
Connection example 1: HTL encoder, bipolar, with reference signal
Figure 7-3
Signal cables must be twisted in pairs in order to improve resistance to induced interference.
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Function
Electronic power supply
Electronic power supply
Electronics ground
Electronics ground
to 2.5 mm
2
Connection example 1: HTL encoder, bipolar, with reference signal
ac.maher.co.ir
Additional system components
7.2 Sensor Module Cabinet-Mounted SMC30
Technical specifications
Voltage: 24 V (20.4 – 28.8 V)
Power consumption: Max. 0.55 A
Max. current via the jumper in the connector: 20 A
2
203