Siemens SINAMICS DCM Manual page 29

Type spectrum, ordering information
2.4 Ordering information for options and accessories
2.4 Ordering information for options and accessories
Ordering information for options with order codes
Table 2- 1 Control Unit CUD options
Option
Advanced CUD in left slot
Standard CUD in right slot (possible with option G00)
Advanced CUD in right slot (possible with option G00)
CBE20 PROFINET, left (possible with option G00)
CBE20 PROFINET, right (possible with option G11)
Memory card, left
Memory card, right (possible with options G10 and G11)
Note: Standard equipment = Standard CUD, left
Table 2- 2 Options field
Option
2Q field power unit (not possible for 15 A and 30 A devices)
No field power unit (not possible for 15 A and 30 A devices)
Field power unit with 85 A rated current
(possible for devices with rated armature DC current ≥1500 A, in standard version and with
option L11)
Table 2- 3 Fan options
Option
Device without fan
(possible for devices with a rated armature DC current ≥1500 A)
Note:
The air flow specified in the technical data must be maintained (fan air flow in m
Fan for 1-phase connection
(possible for devices with rated armature DC current 400 A to 1200 A)
30
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
Article number of SINAMICS DCM with
Z designation and order codes (multiple
order codes together) and/or plain text, if
necessary
Order codes
G00
G10
G11
G20
G21
S01
S02
Order codes
L11
L10
L85
Order codes
L20
/h).
3
L21
SINAMICS DCM DC Converter