Siemens SINAMICS DCM Manual page 282

⇒ In the project navigator, click the plus sign next to the drive unit that you want to configure.
The plus sign changes into a minus sign and the options for configuring the drive unit appear
as a directory tree under the drive unit.
⇒ Double click Configure drive unit
Configuring a drive unit
Figure 8-17
⇒ If you have plugged in a Profinet CBE20 module (option G20), the module needs to be
activated here
⇒ Click Continue >
Under Drive properties, you can enter optional information about the drive/project.
⇒ Click Continue >
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
8.4 Commissioning with the STARTER commissioning tool
Configuring a drive unit
ac.maher.co.ir
Commissioning
283