Siemens SINAMICS DCM Manual page 481

Descriptions of functions
10.5 Communication via PROFINET IO
Table 10- 38 Submodules depending on the particular drive object
Module Subslot 1
MAP
D_CTRL MAP
Encoder MAP
TM31, TM15, MAP
DI_DO
TM150 MAP
Control Unit MAP
TM15/TM17 Not supported.
The telegrams in subslots 2, 3 and 4 can be freely configured, i.e. they can also remain empty.
10.5.6 Communication with CBE20
The CBE20 is a Communication Board that can be flexibly used and which can be operated
with different communication profiles. Only one firmware of a communication profile can be
loaded at any one time. The available firmware files are saved with the communication
profiles in UFW files on the Control Unit memory card.
The required file is selected using parameter p8835. A POWER ON must be carried out after
selecting the desired UFW file. During the subsequent system boot, the corresponding UFW
file is loaded. The new selection then becomes active.
Table 10- 39 UFW files and selection in the pointer file
UFW file and folder on the memory card
/SIEMENS/SINAMICS/CODE/CB/CBE20_1.UFW
/SIEMENS/SINAMICS/CODE/CB/CBE20_2.UFW
/SIEMENS/SINAMICS/CODE/CB/CBE20_3.UFW
/SIEMENS/SINAMICS/CODE/CB/CBE20_4.UFW
/OEM/SINAMICS/CODE/CB/CBE20.UFW
Identification of the firmware version
Using parameter r8858, the loaded firmware version of the PROFINET interface can be
identified uniquely.
482
Subslot 2 Subslot 3
PROFIsafe PZD telegram
- Telegrams: 1...352
free PZD-16/16, 32/32
Reserved Telegrams: 81, 82, 83
free PZD-4/4
Reserved Telegrams: no
free PZD-4/4
Reserved Telegrams: no
free PZD-4/4
Reserved Telegrams: 390, 391, 392,
393, 394, 395
free PZD-4/4
ac.maher.co.ir
Subslot 4
PZD extension
PZD-2/2, -2/4, -2/6
PZD-2/2, -2/4, -2/6
Reserved
Reserved
Reserved
Functionality (p8835)
PROFINET device
PN_Gate
SINAMICS Link
EtherNet/IP
Customized
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Max. number
of PZD
64/64
4/12
5/5
7/7
5/21
Pointer file content
1
2
3
4
99