Siemens SINAMICS DCM Manual page 242

7.4.10 Technical data
Table 7- 37 Technical data
Electronic power supply
Voltage
Current (without DRIVE-CLiQ or digital
outputs)
Power loss
PE/ground connection
Response time
Weight
Degree of protection
Note
In order to guarantee the degree of protection, all of the connectors must be correctly
screwed into place and appropriately locked.
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Unit
V
DC
A
DC
W
On enclosure with M4/1.8 Nm screw
The response time for the digital inputs/outputs and the analog inputs/outputs
consists of the following elements:
Response time on the component itself (approx. 1/2 DRIVE-CLiQ clock cy-
•
cle).
Transmission time via the DRIVE-CLiQ connection (approx. 1 DRIVE-CLiQ
•
clock cycle)
Evaluation on the Control Unit (see function diagram)
•
Further information: SINAMICS DCM List Manual, Chapter "Function diagrams"
kg
IP20
ac.maher.co.ir
Additional system components
7.4 Terminal Module TM31
Value
24 DC (20.4 – 28.8)
0.5
<10
1
243