Siemens SINAMICS DCM Manual page 190

7.1.3 Interface description
7.1.3.1 Overview
Figure 7-1
MAC address
The MAC address of the Ethernet interface is located on the upper side of the board.
7.1.3.2 X1400 Ethernet interface
Table 7- 1 X1400 Ethernet, ports 1-4
Pin
1
2
3
4
5
6
7
8
Screened back-
shell
Connector type: RJ45 socket
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
7.1 Option Board: Communication Board Ethernet CBE20
Interface description CBE20
Signal name
RXP
RXN
TXP
Reserved, do not use
Reserved, do not use
TXN
Reserved, do not use
Reserved, do not use
M_EXT
ac.maher.co.ir
Additional system components
Technical specifications
Receive data +
Receive data -
Transmit data +
Transmit data -
Screen, permanently connected
191