Siemens SINAMICS DCM Manual page 656

● Convert the existing DCC Charts
– Open the DCC editor by double clicking on the DCC chart
– In the DCC editor, in the menu, selection "Options" → "Block types..."
– Answer the question "Do you wish to update the block types in the DCC editor" with
– Shift the DCC library, which appears in the "Libraries installed in Starter", to the right
– Select "Accept"
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
"OK".
Figure 11-2 Importing the DCC library (1)
with ">>"
Figure 11-3 Importing the DCC library (2)
ac.maher.co.ir
Maintenance
11.1 Upgrading software releases
657