Siemens SINAMICS DCM Manual page 465

Descriptions of functions
10.5 Communication via PROFINET IO
Figure 10-41 STARTER - Successful assignment of the IP configuration
Once the "Edit Ethernet Node" dialog screen has closed and the node overview has been
updated (F5), a display indicates that the node properties have been successfully assigned.
Figure 10-42 STARTER - Accessible nodes update completed
Note
The IP addresses allocated for the PC and the PROFINET interface in the drive must be
different; otherwise communication between the PC and drive is not possible.
466
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter