Siemens SINAMICS DCM Manual page 109

Connecting
6.2 Cable routing into the unit
6.2 Cable routing into the unit
Cable routing example
Figure 6-10
Note
For devices with a rated DC current ≤280 A, the PROFINET cable and the DRIVE-CLiQ
cable must be routed into the device from the top (PROFINET is only available with
Communication Board(s) CBE20).
110
Example for cable routing when fully expanded
ac.maher.co.ir
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001