Siemens SINAMICS DCM Manual page 253

Dc converter

Hide thumbs Also See for SINAMICS DCM:

Additional system components

7.5 Terminal Module TM150

Installation

1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.

2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latch

into position.

3. Slide the components along the mounting rail to either the left or right up to their final

1. First shift the mounting slide downwards at the lug to release the interlocking with the

mounting rail.

2. Swivel the component to the front and withdraw it upwards from the DIN rail.

Mounting slide

Standard mounting rail

Removing a TM150 from a mounting rail

ac.maher.co.ir

SINAMICS DCM DC Converter

Operating Instructions, 02.2015, A5E34763375/RS-AA/001