Siemens SINAMICS DCM Manual page 611

Descriptions of functions
10.33 Diagnostics
Startup trace
A startup trace basically consists of a conventional single trace with all of its configuration
options (number of channels, sampling depth, recording cycle, etc.). With the appropriate
configuration, a startup trace is automatically active after a drive restarts.
Configuring the startup trace
1. In STARTER, click the
The "Trace" parameterizing screen form is then displayed.
Figure 10-100 Startup trace in STARTER
2. Activate the "Save recording in the device" checkbox.
612
symbol (device trace-function generator).
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter