Siemens SINAMICS DCM Manual page 300

8.5 Activating function modules
Subfunctions can be activated in the SINAMICS family drives as function modules.
Through activation, the parameters of the corresponding functionalities are also displayed.
Function modules can be individually activated / deactivated on every drive object.
For SINAMICS DC MASTER, the following subfunctions are modeled as function module.
● Technology controller
● Free function blocks
● PROFINET interface
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
Commissioning
8.5 Activating function modules
301