Siemens SINAMICS DCM Manual page 452

Commissioning in STARTER
Direct data exchange is configured in HWConfig and is simply an extension of an existing
telegram. Telegrams can be extended in STARTER (e.g. p0922 = 999).
Figure 10-28 Configuring the direct data exchange links in STARTER
In order to terminate the configuration of direct data exchange for the DOs, the telegram data
of the DOs in STARTER must be matched to those in the HW Config and must be extended.
The configuration is made centrally via the configuration of the respective CU.
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
Descriptions of functions
10.4 Communication via PROFIBUS DP
453