Siemens SINAMICS DCM Manual page 540

Figure 10-68 Operational brake (p50080 = 2), brake-release time (p50087) negative
Footnotes for the two figures above
<1> Mechanical deceleration of drive by means of operational brake
<2> Drive coasting down; "Close holding brake" first applied when n < nmin
<4> Here, motor works against the brake, which is still closed (p50087 negative)
<5> Time for brake to be closed, during which motor continues to apply torque (p50088)
Figure 10-69 Holding brake (p50080 = 1), brake-release time (p50087) negative
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
10.16 Switch-on command for holding or operational brake
ac.maher.co.ir
Descriptions of functions
541