Siemens SINAMICS DCM Manual page 77

Transportation, unpacking, installation
5.2 Installation
5.2 Installation
CAUTION
Failure to lift the unit properly can lead to physical injury or material damage.
The unit should only be lifted with suitable equipment (work gloves should be used) and by
appropriately qualified personnel.
In order to prevent the enclosure from becoming deformed when lifting units with a rated
DC current above 720 A, no horizontal forces may be exerted on the lifting eyes.
The user assumes responsibility for installing the converter unit, motor, transformer, and
other units in accordance with safety regulations (e.g. EN, DIN, VDE) and all other relevant
national or local regulations affecting conductor dimensioning, protection, grounding,
disconnectors, overcurrent protection, and so on.
The unit must be installed in accordance with safety regulations (e.g. EN, DIN, or VDE) as
well as all other applicable national or local regulations. Grounding, conductor
dimensioning, and the relevant short-circuit protection work must be carried out correctly in
order to ensure operational safety.
Options for lifting units with a 1500 to 3000 A rated DC current
Figure 5-1
78
Options for lifting units with 1500 - 3000 A currents
ac.maher.co.ir
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001