Siemens SINAMICS DCM Manual page 301

Commissioning
8.5 Activating function modules
8.5.1 Activating offline with STARTER
Function modules can be defined for all DOs by using the properties dialog (activate by
clicking with the right mouse button on the DO in the project navigator). Shown as example
for the closed-loop control DO "Drive_1":
Figure 8-35 Properties
The function modules can be reached in the "Function modules" tab in the opening dialog.
302
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter