Siemens SINAMICS DCM Manual page 359

Operation
9.3 Controlling via the AOP30 operator panel
9.3.5 Menu: Commissioning/Service
9.3.5.1 Drive commissioning
Selecting this option enables you to re-commission the drive from the main menu, using the
AOP wizard.
Basic commissioning
A few key parameters (such as the maximum speed, ramp-up time, and ramp-down time)
are requested. The changes can then be permanently saved in the final confirmation screen.
360
Overview of faults/alarms
When you navigate to the line with active
alarms/faults and then press the F5 (<Diag>)
key, the system displays a screen in which
you may select the current or old
alarms/faults.
Displaying diagnostics
When you navigate to the required line and
then press the F5 (<OK>) key, the corre-
sponding faults/alarms are displayed. The list
of current faults is selected here as an exam-
ple.
Display of current faults
A maximum of eight current faults are dis-
played along with their fault number and
name.
To display additional help regarding the cause
of the problem and how to solve it, choose F1
(<Help>).
To acknowledge the faults, choose F5
(<Ack.>). If a fault cannot be acknowledged,
the fault remains.
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter