Siemens SINAMICS DCM Manual page 595

Descriptions of functions
10.31 Terminal Module Cabinet TMC (option G63)
10.31 Terminal Module Cabinet TMC (option G63)
The Terminal Module Cabinet (TMC) enables the simple connection of the CUD standard
signals (X177) via spring-loaded terminals in an easily accessible area of the control cabinet.
See Chapter Ordering information for options and accessories (Page 30) for ordering data.
Figure 10-92 Terminal Module Cabinet
The CUD is equipped with a "Cabinet Board".
During installation, connectors X1 and X2 on the adapter board must be connected to
connectors X1 and X2 on the TMC with the supplied cables (3 m). The cables must be laid in
a cable duct.
For terminal assignment, see Chapter Assignment of terminals and connectors (Page 168).
596
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter