Siemens SINAMICS DCM Manual page 647

Descriptions of functions
10.37 Write and know-how protection
2. If you want to save with protection, activate the "Know-how protection without copy
protection" or "Know-how protection with copy protection" option.
Figure 10-112 Activating load to file system know-how protection
The input fields are then active. Without copy protection, only the input fields for
password input are active. With copy protection, the two input fields for the serial number
are also active. Generally, the entries in the input fields are shown in encrypted form.
3. Enter the required password in the "New password" field and enter it again in the
"Confirm password" field.
4. Enter the serial number of the new memory card for which the data is intended.
If you have selected the "Know-how protection with copy protection" option, the input of
the Control Unit serial number is also obligatory.
5. In this case, also enter the serial number of the Control Unit in the appropriate input field.
6. Click "OK" to confirm the settings you made.
Result
The data of the subproject is stored in the required encryption in your file system. With the
aid of this encrypted data, an end user can install a new memory card or Control Unit for the
drive unit.
648
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter