Siemens SINAMICS DCM Manual page 272

8.4 Commissioning with the STARTER commissioning tool
8.4.1 STARTER commissioning tool
Description
You can use the STARTER commissioning tool to configure and commission your
SINAMICS drives or drive systems. The drive configuration can be performed with the aid of
the STARTER wizard for drive configuration.
Note
This chapter described how to commission with STARTER. STARTER has a comprehensive
online help that explains in detail all of the sequences and setting options in the system. This
is the reason that this chapter is restricted to the individual commissioning steps.
Prerequisites for installing STARTER
STARTER is installed on a PG / PC. The hardware and software preconditions are described
in the readme file for STARTER. This file can be called from the starting page of the
SINAMICS DCM documentation on DVD.
Note
The SIMOTION SCOUT engineering tool includes the STARTER functionality to commission
drives.
From version V4.2, SCOUT has also been released for commissioning SINAMICS DCM.
8.4.1.1 Installing the STARTER commissioning tool
STARTER is installed using the "setup" file on the CD supplied. When you double-click the
"Setup" file, the installation wizard guides you through the process of installing STARTER.
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
8.4 Commissioning with the STARTER commissioning tool
ac.maher.co.ir
Commissioning
273