Siemens SINAMICS DCM Manual page 294

Transferring a STARTER project to the drive unit
The following steps are required to transfer the STARTER project created offline to the drive
unit:
● Step 1
Select the menu command Project > Connect to target system
Selection in the toolbar:
● Step 2
Select DCM_ADVANCED_CUD as drive unit in the following screen and confirm with OK:
Figure 8-29
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
8.4 Commissioning with the STARTER commissioning tool
Target device selection
ac.maher.co.ir
Commissioning
295