Siemens SINAMICS DCM Manual page 290

Data on field
Figure 8-25
⇒ Select the behavior of the field control and, if applicable, the field weakening.
Note
If field weakening is activated, the field characteristic curve must be recorded with the
optimization run p50051= 27 on the drive before the drive can be switched on.
⇒ Click Continue >
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
8.4 Commissioning with the STARTER commissioning tool
Data on field
ac.maher.co.ir
Commissioning
291