Siemens SINAMICS DCM Manual page 657

Maintenance
11.1 Upgrading software releases
– The chart is compiled into the new version
– Perform these steps for all DCC charts which are in the drive.
Step 6: Load into the target system, RAM to ROM
Load the project into the drive (load into the target system) to upgrade the charts in the drive
to the new version and permanently save the parameter assignment (carry out RAM to
ROM).
658
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter